Cisco AIR-PCI340 Installation And Configuration Manual page 177

Chapter 8 Using the Aironet Client Monitor (ACM)
Table 8-3
Status Element
SSID
Access Point Name
Access Point IP Address
Link Speed
Client Adapter IP Address
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-07
Connection Status Screen Elements (continued)
Description
The name of the network to which your client adapter is currently
associated.
Note
The name of the access point to which your client adapter is associated.
It is shown only if the client adapter is in infrastructure mode, the
access point was configured with a name, and Aironet Extensions are
enabled (on access points running Cisco IOS Release 12.2(4)JA or
greater).
The IP address of the access point to which your client adapter is
associated. It is shown only if the client adapter is in infrastructure
mode, the access point was configured with an IP address, and Aironet
Extensions are enabled (on access points running Cisco IOS Release
12.2(4)JA or greater).
Note
The rate at which your client adapter is currently transmitting data
packets.
Value:
The IP address of your client adapter.
Refer to the SSID1 parameter in
setting the client adapter's SSID.
If Aironet Extensions are disabled, the IP address of the
associated access point is shown as 0.0.0.0.
1, 2, 5.5, or 11 Mbps (2.4-GHz client adapters);
6, 9, 12, 18, 24, 36, 48, or 54 Mbps (5-GHz client adapters)
Pop-Up Menu
Table 5-2 for information on
8-11