Adding The Acu Icon To Or Removing It From The Desktop; Accessing Online Help - Cisco AIR-PCI340 Installation And Configuration Manual

Client Adapter Software Procedures
Figure 9-7

Adding the ACU Icon to or Removing it from the Desktop

By default, an ACU icon is added to your computer's desktop when you install the Install Wizard.
•
•

Accessing Online Help

To access ACU's online help, open ACU. Then click the Help icon or select Contents from the Help
drop-down menu. An overview of ACU appears.
From the Overview of the Aironet Client Utility screen, you can access additional information.
•
•
•
•
•
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
9-14
About Aironet Client Utility Screen
If you wish to remove the ACU icon from the desktop, run the Install Wizard again and set the Place
Icon on Desktop parameter to No or right-click the icon, click Delete, and click Yes to confirm your
decision.
If you want to add the ACU icon to the desktop, set the Place Icon on Desktop parameter to Yes in
the Install Wizard.
To access information on specific menu options, click Contents. Double-click Aironet Client
Utility Commands, the desired menu (such as Options Menu), and the desired topic (such as
Preferences).
To access information on specific parameters, click Contents. Double-click Configurable
Parameters, the client adapter, a parameter category (such as System Parameters), and the desired
parameter (such as SSID).
To access information on specific diagnostic topics, click Contents. Double-click Run Time
Diagnostic Information, a diagnostic category (such as Running a Linktest), and the desired topic
(such as Packet Size).
To search for a specific topic, click Index, select an index entry, and click Display.
To search for a specific word or phrase, click Contents or Index, click the Find tab, and follow the
instructions in the Find Setup Wizard window.
Chapter 9 Routine Procedures
OL-1394-07