Cisco AIR-PCI340 Installation And Configuration Manual page 153

Chapter 7 Performing Diagnostics
Table 7-3
Status
Current Link Speed
Data Rate
Current Power Level
Available Power Levels
Channel (Frequency)
Status
SSID
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-07
Client Adapter Status (continued)
Description
The rate at which your client adapter is currently transmitting data
packets.
Value:
The rate at which your client adapter has been configured to transmit or
receive data packets.
Value:
Note
The power level at which your client adapter is currently transmitting.
The maximum level is dependent upon the radio installed in your client
adapter and your country's regulatory agency.
Value:
Note
The power levels at which your client adapter is capable of
transmitting. The maximum level is dependent upon the radio installed
in your client adapter and your country's regulatory agency.
Value:
Note
The frequency that your client adapter is currently using as the channel
for communications.
Value:
Note
The operational mode of your client adapter.
Value:
The name of the network to which your client adapter is currently
associated.
Note
Viewing the Current Status of Your Client Adapter
1, 2, 5.5, or 11 Mbps (2.4-GHz client adapters);
6, 9, 12, 18, 24, 36, 48, or 54 Mbps (5-GHz client adapters)
1 Mbps, 2 Mbps, 5.5 Mbps, 11 Mbps, or Auto Rate Selection
(2.4-GHz client adapters);
6 Mbps, 9 Mbps, 12 Mbps, 18 Mbps, 24 Mbps, 36 Mbps,
48 Mbps, 54 Mbps, or Auto Rate Selection (5-GHz client
adapters)
Refer to the Data Rate parameter in
on setting the client adapter's data rate.
1, 5, 15, or 30 mW (340 series client adapters);
1, 5, 20, 30, 50, or 100 mW (350 series client adapters);
5, 10, or 20 mW (5-GHz client adapters)
Refer to the Transmit Power parameter in
information on setting the client adapter's power level.
1, 5, 15, or 30 mW (340 series client adapters);
1, 5, 20, 30, 50, or 100 mW (350 series client adapters);
5, 10, or 20 mW (5-GHz client adapters)
Refer to the Transmit Power parameter in
information on the client adapter's available power levels.
Dependent on client adapter radio and regulatory domain
Refer to the Channel parameter in
selecting the frequency for your client adapter.
Error, Not Associated, Associated, Authenticating,
Authenticated, Authentication Failed, or Ad Hoc Mode
Refer to the SSID1 parameter in
the client adapter's SSID.
Table 5-3 for information
Table 5-3 for
Table 5-3 for
Table 5-3 for information on
Table 5-2 for information on
7-9