Cisco AIR-PCI340 Installation And Configuration Manual page 113

Chapter 5 Configuring the Client Adapter
Figure 5-9
Perform one of the following:
Step 4
If you selected an SSID from the list of available networks, make sure the SSID appears in the
•
Network name (SSID) field.
If you clicked Add, enter the case-sensitive SSID of your profile in the Network name (SSID) field.
•
Select WPA from the Network Authentication drop-down list. This option enables your client adapter to
Step 5
associate to access points using WPA.
Select TKIP from the Data encryption drop-down list.
Step 6
Go to the
Step 7
this profile.
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-07
Wireless Network Properties Screen (Association Tab)
"Enabling EAP Authentication in Windows"
Setting Network Security Parameters
section below to enable EAP authentication for
5-43