Table of Contents
Advertisement
Chapter 2
Preparing for Installation
Warnings
Observe the following warnings when operating the client adapter:
Warning
Do not operate your wireless network device near unshielded blasting caps or in an explosive
environment unless the device has been modified to be especially qualified for such use.
In order to comply with FCC radio frequency (RF) exposure limits, dipole antennas should be located
Warning
at a minimum of 7.9 inches (20 cm) or more from the body of all persons.
Warning
In order to comply with RF exposure limits established in the ANSI C95.1 standards, it is recommended
when using a laptop with a PC card client adapter that the adapter's integrated antenna is positioned
more than 2 inches (5 cm) from your body or nearby persons during extended periods of transmitting
or operating time. If the antenna is positioned less than 2 inches (5 cm) from the user, it is
recommended that the user limit exposure time.
Translated versions of these safety warnings are provided in
Unpacking the Client Adapter
Follow these steps to unpack the client adapter:
Step 1
Open the shipping container and carefully remove the contents.
Return all packing materials to the shipping container and save it.
Step 2
Ensure that all items listed in the
Step 3
each item for damage.
Note
Package Contents
Each client adapter is shipped with the following items:
•
•
•
•
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-07
If any item is damaged or missing, notify your authorized Cisco sales representative. Any remote
antenna and its associated wiring are shipped separately.
Standard 2-dBi dipole antenna (PCI cards only)
Quick Start Guide: Cisco Aironet Wireless LAN Client Adapters
Cisco Aironet Wireless LAN Client Adapters CD
Cisco product registration card
"Package Contents"
section below are included in the shipment. Check
Unpacking the Client Adapter
Appendix
B.
2-3
Advertisement
Table of Contents
Troubleshooting
