Cisco AIR-PCI340 Installation And Configuration Manual page 132

Using LEAP with a Manually Prompted Login
Step 1 Perform one of the following:
If you select a manual LEAP profile from the Use Selected Profile drop-down box, the LEAP login
•
screen appears (see
Figure 6-8
Enter your LEAP username and password and click OK. The domain name is optional.
Note
If auto profile selection selects a manual LEAP profile, you must select the Manual LEAP Login
•
option from the Commands drop-down menu (see
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
6-10
Figure 6-8).
LEAP Login Screen
The LEAP login screen shown above appears on computers running Windows NT, 2000, or
XP. The LEAP login screen looks slightly different on computers running other Windows
operating systems.
Chapter 6
Figure 6-9).
Using EAP Authentication
OL-1394-07