Cisco AIR-PCI340 Installation And Configuration Manual page 26

Network Configurations Using Client Adapters
Buttons on the ACU Screens
The buttons on the ACU screens are used to perform specific functions.
common buttons.
Table 1-2
Button
Apply
Cancel
Defaults
Help
OK
Start
Stop
Network Configurations Using Client Adapters
Client adapters can be used in a variety of network configurations. In some configurations, access points
provide connections to your network or act as repeaters to increase wireless communication range. The
maximum communication range is based on how you configure your wireless network.
This section describes and illustrates the two most common network configurations:
•
•
For examples of more complex network configurations involving client adapters and access points, refer
to the documentation for your access point.
Note Refer to
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
1-8
Buttons on the ACU Screens
Ad hoc wireless local area network (LAN)
Wireless infrastructure with workstations accessing a wired LAN
Chapter 5 for information on setting the client adapter's network mode.
Description
Saves any changes without exiting the screen
Exits the screen without saving any changes
Displays the default value of each parameter
Provides information on the screen and its parameters
Saves any changes and exits the screen
Initiates a test
Stops a test that is running
Chapter 1 Product Overview
Table 1-2 describes the most
OL-1394-07