Loading Documents On The Adf For Scanning - Fujitsu fi-6130 Operator's Manual

2.2 Loading Documents on the ADF for Scanning

fi-6130 / fi-6230 Image Scanner Operator's Guide
2.2 Loading Documents on the ADF for Scanning
HINT
Refer to Chapter
required document sizes and paper quality for ensuring correct operation when
scanning documents from the ADF.
1. Align the edges of the documents.
1) Confirm that all the documents have the same width.
2) Check the number of sheets in the document stack.
(For details, see Section
- A4/letter-size paper or smaller that makes a document stack of 5 mm or less
- Maximum 50 sheets at A4/letter, 20 lb, or 80 g/m
2. Fan the documents as follows:
Select a stack of documents 5 mm or less high.
Hold the document with both hands and fan it out several times.
Turn the document by 90 degrees, and then fan it in the different orientation again.
3. Load the document on the ADF paper chute.
Set the documents face-down in the ADF paper chute (so that the side to be scanned faces towards the ADF paper
chute).
file:////10.232.227.50/Manual/fi-6130_6230_Lynx3L/OG/R02/02_081030/contents/EN/02/c02_02_01.htm (1/4) [2008/10/30 15:13:46]
"7 ADF AND PAPER
"7.3 Maximum Document Loading
SPECIFICATION" for information about the
Capacity.")
2
TROUBLESHOOTING
CONTENTS MAP
TOP