Hdlc - Juniper JUNOSE 11.1.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 3-24-2010 Reference Manual

JUNOSe 11.1.x System Event Logging Reference Guide
None
Emergency
None
Alert
None
Critical
Accessing redundancy mode is not supported on the standby SRP; changing
Error
redundancy mode is not supported on the standby SRP; high availability disabled
due to state error
High availability disabled due to incompatible release on standby; high availability
Warning Log
disabled due to user initiated disable
High availability disabled due to standby down; high availability is now active
Notice Log
None
Info
None
Debug
None
Filter

hdlc

HDLC layer
Description
None
Emergency
None
Alert
None
Critical
Interface creation failures (interface is not created); interface configuration errors;
Error
interface pool failures
Interface creation failures during initialization; interface deletion failures (interface
Warning Log
is still deleted); interface pool failures (might not cause problems)
Interface pool changes
Notice Log
Layer initialization messages; interface creation; interface modification; interface
Info
deletion
Detailed layer initialization; interface creation details; interface deletion details
Debug
88
hdlc