Juniper JUNOSE 11.1.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 3-24-2010 Reference Manual page 220

JUNOSe 11.1.x System Event Logging Reference Guide
pimAutoRPRcvdLog
Protocol Independent Multicast (PIM) AutoRP messages received
Description
None
Emergency
None
Alert
None
Critical
None
Error
None
Warning Log
None
Notice Log
Short description of received PIM AutoRP packets
Info
Complete print of received PIM AutoRP packets
Debug
interface-ip-address [ ip-address ipAddress | unnumbered interfaceType
Filter 1
interfaceSpecifier ]
NOTE: For information about interface types and specifiers, see Interface Types and
Specifiers in JUNOSe Command Reference Guide.
router virtualRouterName [ interface-ip-address [ ip-address ipAddress | unnumbered
Filter 2
interfaceType interfaceSpecifier ] ]
196
pimAutoRPRcvdLog
interface-ip-address Logs events for a specific interface
ip-address Specifies that you will identify the interface by entering an IP address
ipAddress IP address of interface for which you want to log events
unnumbered Specifies that the interface is unnumbered
interfaceType Type of interface for which you want to log events
interfaceSpecifier Location of unnumbered interface in the appropriate format
router Logs events for a specific virtual router
virtualRouterName Name of virtual router for which you want to log events
interface-ip-address Logs events for a specific interface on the virtual router
ip-address Specifies that you will identify the interface by entering an IP address