Bgpneighborchanges - Juniper JUNOSE 11.1.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 3-24-2010 Reference Manual

JUNOSe 11.1.x System Event Logging Reference Guide
NOTE: Send messages are logged to the bgpMessages log when a message is added
to the send queue. A debug message is logged to the bgpConnections log when the
message is actually passed to TCP.
access-class This filter is not currently supported
Filter 1
peer See description of the bgpRoutes peer filter for information about this filter
Filter 2
route-map This filter is not currently supported
Filter 3
router See description of the bgpRoutes router filter for information about this filter
Filter 4
in Matches on traffic coming into the router
Filter 5
out Matches on traffic going out of the router
Filter 6

bgpNeighborChanges

BGP neighbor change
Description
None
Emergency
None
Alert
None
Critical
None
Error
None
Warning Log
A peer has entered into or left the established state; reason for a session going idle
Notice Log
None
Info
None
Debug
access-class This filter is not currently supported
Filter 1
peer See description of the bgpRoutes peer filter for information about this filter
Filter 2
route-map This filter is not currently supported
Filter 3
44
bgpNeighborChanges