Juniper JUNOSE 11.1.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 3-24-2010 Reference Manual page 244

JUNOSe 11.1.x System Event Logging Reference Guide
None
Error
None
Warning Log
None
Notice Log
None
Info
Supported RADIUS attributes found in the Access-Accept or Access-Reject packet;
Debug
reports changes to the Service-Acct-Interval attribute (Juniper VSA 26-140)
None
Filter
radiusClient
RADIUS Authentication and Accounting Client
Description
None
Emergency
None
Alert
None
Critical
Internal allocation error of base RADIUS server table; invalid virtual router for user's
Error
context; failure to include the ICR-Partition-Id VSA in Access-Request and accounting
messages when the ICR partition is not found in the AAA list
Failure to send accounting on or accounting off; tunnel password format error; tunnel
Warning Log
accounting request
Dropping tunnel attribute
Notice Log
ICR partition accounting message failures when the Accounting-On response is
Info
pending from the RADIUS server
Authentication or accounting failure due to internal memory allocation failure;
Debug
memory allocation failure for profile; failed to insert tunnel attribute and tunnel tag
table; found unexpected tunnel table
None
Filter
radiusCoAAttributes
RADIUS CoA attributes
Description
220
radiusClient