Hdlc; Hotfixgeneral - Juniper JUNOSE SOFTWARE 11.2.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 6-29-2010 Reference Manual

JunosE 11.2.x System Event Logging Reference Guide
Alert
Critical
Error
Warning Log
Notice Log
Info
Debug
Filter

hdlc

Description
Emergency
Alert
Critical
Error
Warning Log
Notice Log
Info
Debug
Filter

hotfixGeneral

Description
84
None
None
Accessing redundancy mode is not supported on the standby SRP; changing redundancy
mode is not supported on the standby SRP; high availability disabled due to state error
High availability disabled due to incompatible release on standby; high availability disabled
due to user initiated disable
High availability disabled due to standby down; high availability is now active
None
None
None
HDLC layer
None
None
None
Interface creation failures (interface is not created); interface configuration errors;
interface pool failures
Interface creation failures during initialization; interface deletion failures (interface is still
deleted); interface pool failures (might not cause problems)
Interface pool changes
Layer initialization messages; interface creation; interface modification; interface deletion
Detailed layer initialization; interface creation details; interface deletion details
None
Hotfix general
Copyright © 2010, Juniper Networks, Inc.