Atm1483; Atm1483Vcclass - Juniper JUNOSE 11.1.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 3-24-2010 Reference Manual

JUNOSe 11.1.x System Event Logging Reference Guide
None
Filter

atm1483

ATM 1483 data service
Description
None
Emergency
None
Alert
None
Critical
Error applying static map entry for a newly created circuit of an NBMA interface;
Error
unable to configure interfaces on ATM interface; unable to determine interface
location for ATM AAL5 interface; unable to determine maximum interface
configuration count for interface; unable to configure interface on ATM interface
Error getting location of underlying AAL5 or ATM interface; error binding to AAL5
Warning Log
interface; error opening a circuit for an NBMA interface; attempting to associate a
static map to an underlying ATM interface that does not exist; error restoring circuits
from NVS; error removing static map entry; NVS entry not found for static map entry;
error storing static map entry in NVS; error expanding interface pool, interface binding
pool, or subscriber pool
Interface pool, interface binding pool, or subscriber pool expanded by an incremental
Notice Log
number of entries; unable to allocate a message to send a subinterface up or down
notification
Dropping subinterface up or down notification due to removal of subinterface;
Info
configure interfaces on ATM interface; elapsed time for downloading interfaces;
elapsed time for ATM AAL5 present notification; maximum interface count per call
None
Debug
None
Filter

atm1483VcClass

Application of attributes configured in a virtual circuit (VC) class to PVCs
Description
None
Emergency
None
Alert
None
Critical
32
atm1483