Juniper JUNOSE 11.1.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 3-24-2010 Reference Manual page 221

NOTE: For information about interface types and specifiers, see Interface Types and
Specifiers in JUNOSe Command Reference Guide.
pimAutoRPSentLog
Protocol Independent Multicast (PIM) AutoRP messages sent
Description
None
Emergency
None
Alert
None
Critical
None
Error
None
Warning Log
None
Notice Log
Short description of the sent PIM AutoRP packets
Info
Complete print of the sent PIM AutoRP packets
Debug
interface-ip-address See description of the pimAutoRPRcvdLog interface-ip-address
Filter 1
filter for information about this filter
router See description of the pimAutoRPRcvdLog router filter for information about
Filter 2
this filter
pimBsrRcvdLog
Reception of PIM-SM IPv4 BSR messages (BSM and C-RP-Advs)
Description
None
Emergency
ipAddress IP address of interface for which you want to log events
unnumbered Specifies that the interface is unnumbered
interfaceType Type of interface for which you want to log events
interfaceSpecifier Location of unnumbered interface in the appropriate format
Chapter 15: P Commands
197
pimAutoRPSentLog