Ospfhellopktsrcvd - Juniper JUNOSE 11.1.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 3-24-2010 Reference Manual

JUNOSe 11.1.x System Event Logging Reference Guide
None
Emergency
None
Alert
None
Critical
Error enabling or disabling OSPF; allocation errors
Error
State change errors (for example, OSPF could not be enabled); errors creating or
Warning Log
destroying an area, an OSPF range, or a virtual link; error enabling OSPF protocol
OSPF enabled or disabled; BFD enabled or disable on an OSPF interface
Notice Log
Event for a dynamic neighbor
Info
Bouncing adjacency with a neighbor
Debug
interface-ip-address See description of the ospfElectDr interface-ip-address filter
Filter 1
for information about this filter
router See description of the ospfElectDr router filter for information about this
Filter 2
filter

ospfHelloPktsRcvd

Processing of hello messages received on OSPF-enabled interfaces
Description
None
Emergency
None
Alert
None
Critical
None
Error
Invalid packet, hello parameters mismatch (area, network, hello and dead intervals,
Warning Log
version, md5 digest)
None
Notice Log
None
Info
Received hello information (ip source/destination, length)
Debug
174
ospfHelloPktsRcvd