Ospfv3General - Juniper JUNOSE 11.1.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 3-24-2010 Reference Manual

router virtualRouterName [ interface-ip-address [ ip-address ipAddress | unnumbered
Filter 2
interfaceType interfaceSpecifier ] ]
NOTE: For information about interface types and specifiers, see Interface Types and
Specifiers in JUNOSe Command Reference Guide, .

ospfv3General

OSPFv3 general
Description
None
Emergency
None
Alert
None
Critical
Error enabling or disabling OSPFv3; allocation errors
Error
State change errors (for example, OSPFv3 could not be enabled); errors creating or
Warning Log
destroying an area, an OSPFv3 range, or a virtual link
OSPFv3 enabled or disabled; BFD enabled or disable on an OSPF interface
Notice Log
None
Info
None
Debug
interface-ip-address See description of the ospfElectDr interface-ip-address filter
Filter 1
for information about this filter
router Logs events for a specific virtual router
virtualRouterName Name of virtual router for which you want to log events
interface-ip-address Logs events for a specific interface on the virtual router
ip-address Specifies that you will identify the interface by entering an IP address
ipAddress IP address of interface for which you want to log events
unnumbered Specifies that the interface is unnumbered
interfaceType Type of interface for which you want to log events
interfaceSpecifier Location of the unnumbered interface in the appropriate
format
Chapter 14: O Commands
185
ospfv3General