Juniper JUNOSE 11.1.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 3-24-2010 Reference Manual page 117

Memory allocation failure; ImageFix load failure; manual ImageFix activation failure;
Error
ImageFix file errors
Buffer allocation failure; unexpected status received in state X
Warning Log
Application image up, startup ImageFixes activated; reversion from FC ImageFix to
Notice Log
release FC image requires reload of line module; FC ImageFix found for line module
State machine change; unexpected internal communication error; loading complete
Info
announcement; IC up-to-date following SRP switch; sending ImageFix descriptor to
line module
Controller state change announcement; board state change announcement; manual
Debug
ImageFix [de]activation attempt; subsystem announced
None
Filter
icmpTraffic
ICMP frame transmit or receive
Description
None
Emergency
None
Alert
None
Critical
None
Error
None
Warning Log
None
Notice Log
None
Info
All ICMP transmit or receive events
Debug
remote-ip-address ipAddress [ ipAddressMask ]
Filter 1
router virtualRouterName [ remote-ip-address ipAddress [ ipAddressMask ] ]
Filter 2
remote-ip-address Logs events for a remote address
ipAddress Address of remote system for which you want to log messages
ipAddressMask Mask for the remote address
Chapter 10: I Commands
93
icmpTraffic