Juniper JUNOSE 11.1.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 3-24-2010 Reference Manual page 183

Configuration changes for per-VR attributes; dynamic interface creation events
Debug
None
Filter
mplsShimInterface
MPLS Shim Interface events
Description
None
Emergency
None
Alert
None
Critical
Signaling protocol interaction failures; shim interface engine interaction failures;
Error
shim interface finite state machine bad state transitions; shim interface configuration
errors
None
Warning Log
None
Notice Log
None
Info
Shim interface finite state machine transitions; signaling protocol interaction; shim
Debug
interface to engine transactions; shim interface configuration transactions
router virtualRouterName [ interface interfaceType interfaceSpecifier ]
Filter
NOTE: For information about interface types and specifiers, see Interface Types and
Specifiers in JUNOSe Command Reference Guide.
router Logs events for a specific virtual router
virtualRouterName Name of the virtual router for which you want to log events
interface Logs events on a specific interface on the virtual router
interfaceType Type of the interface for which you want to log events. For
example, atm.
interfaceSpecifier Location of the interface in the appropriate format
Chapter 12: M Commands
159
mplsShimInterface