Juniper JUNOSE 11.1.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 3-24-2010 Reference Manual page 229

NOTE: For information about interface types and specifiers, see Interface Types and
Specifiers in JUNOSe Command Reference Guide.
router virtualRouterName [ interface-ipv6-address [ ipv6-address ipv6Address |
Filter 2
unnumbered interfaceType interfaceSpecifier ] ]
NOTE: For information about interface types and specifiers, see Interface Types and
Specifiers in JUNOSe Command Reference Guide.
pimIpv6HelloSentLog
Protocol Independent Multicast (PIM) Hello messages sent
Description
None
Emergency
None
Alert
None
Critical
None
Error
None
Warning Log
None
Notice Log
Short description of the PIM hello messages sent
Info
interfaceType Type of interface for which you want to log events
interfaceSpecifier Location of unnumbered interface in the appropriate format
router Logs events for a specific virtual router
virtualRouterName Name of virtual router for which you want to log events
interface-ipv6-address Logs events for a specific interface on the virtual router
ipv6-address Specifies that you will identify the interface by entering an IPv6
address
ipv6Address IPv6 address of interface for which you want to log events
unnumbered Specifies that the interface is unnumbered
interfaceType Type of interface for which you want to log events
interfaceSpecifier Location of unnumbered interface in the appropriate format
Chapter 15: P Commands
205
pimIpv6HelloSentLog