Ipengine; Ipflowstats - Juniper JUNOSE 11.1.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 3-24-2010 Reference Manual

ipEngine

IP chassis manager
Description
None
Emergency
None
Alert
None
Critical
Failure in operations such as adding, removing, or deleting interfaces or distributing
Error
routing tables to line modules
Errors such as attempting to configure something that is not supported on a module,
Warning Log
or routing table memory is approaching 80 percent full
Something unexpected happened; for example, an interface was deleted twice or,
Notice Log
internal to the software, connections between IC and SRP were deleted twice
Completion status of a user command (for example: " IS command succeeded" )
Info
An engine or agent that corresponds to a virtual router is added or deleted; an
Debug
interface is added or deleted
None
Filter

ipflowstats

J-Flow statistics
Description
None
Emergency
accessList Logs a match on any access-list entry
router Logs events for a specific virtual router
virtualRouterName Name of virtual router for which you want to log events
access-list Logs events for a specific access list
accessListName Name of access list for which you want to log events
access-element-id Logs events for a specific element ID
idNumber Element ID number for which you want to log events; the element
ID is automatically assigned for access-list rules that you explicitly create and is
shown by issuing the show access-list detail command
Chapter 10: I Commands
101
ipEngine