Juniper JUNOSE 11.1.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 3-24-2010 Reference Manual page 232

JUNOSe 11.1.x System Event Logging Reference Guide
pimPktsSentLog
Protocol Independent Multicast (PIM) nonhello
Description
(Register/RegisterStop/JoinPrune/Assert/Graft/GraftAck) messages sent
None
Emergency
None
Alert
None
Critical
None
Error
None
Warning Log
None
Notice Log
Short description of the PIM messages sent
Info
Complete description of the PIM messages sent
Debug
interface-ip-address See description of the pimAutoRPRcvdLog interface-ip-address
Filter 1
filter for information about this filter
router See description of the pimAutoRPRcvdLog router filter for information about
Filter 2
this filter
pimsmGeneral
General PIM sparse mode events
Description
None
Emergency
None
Alert
Failure to initialize PIM sparse mode; memory allocation failures
Critical
Error enabling or disabling PIM sparse mode; error adding or removing state
Error
None
Warning Log
None
Notice Log
208
pimPktsSentLog