Specifications - Cisco IPS-4255-K9 - Intrusion Protection Sys 4255 Installation Manual

Specifications

Specifications

Table 2-3
Table 2-3
Dimensions and Weight
Height
Width
Depth
Weight
Form factor
Expansion
Power
Autoswitching
Frequency
Operating current
Steady state
Maximum peak
Maximum heat dissipation
Environment
Temperature
Relative humidity
Altitude
Shock
Vibration
Acoustic noise
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.0
2-4
lists the specifications for the IPS 4240 and the IPS 4255.
IPS 4240 and IPS 4255 Specifications
1.75 in. (4.45 cm)
17.5 in. (44.45 cm)
14.5 in. (36.83 cm)
20.0 lb (9.07 kg)
1 RU, standard 19-inch rack-mountable
One chassis expansion slot (not used)
100V to 240V AC
47 to 63 Hz, single phase
3.0 A
150 W
190 W
648 BTU/hr, full power usage (65 W)
Operating +32°F to +104°F (+0°C to +40°C)
Nonoperating -13°F to +158°F (-25°C to +70°C)
Operating 5% to 95% (noncondensing)
Nonoperating 5% to 95% (noncondensing)
Operating 0 to 9843 ft (3000 m)
Nonoperating 0 to 15,000 ft (4750 m)
Operating 1.14 m/sec (45 in./sec) ½ sine input
Nonoperating 30 G
0.41 Grms2 (3 to 500 Hz) random input
60 dBa (maximum)
Chapter 2 Installing the IPS 4240 and the IPS 4255
OL-18504-01