Chapter 4 Installing The Ips 4270-20 - Cisco IPS-4255-K9 - Intrusion Protection Sys 4255 Installation Manual

Installing the IPS 4270-20
All IPS platforms allow ten concurrent CLI sessions.
Note
This chapter describes the IPS 4270-20 and how to install it. It also describes the accessories and how
to install them. This chapter contains the following sections:
Introducing the IPS 4270-20, page 4-2
•
Supported Interface Cards, page 4-3
•
Hardware Bypass, page 4-5
•
Front and Back Panel Features, page 4-7
•
• Diagnostic Panel, page 4-11
• Internal Components, page 4-13
• Specifications, page 4-14
Accessories, page 4-15
•
Installing the Rail System Kit, page 4-15
•
Installing the IPS 4270-20, page 4-35
•
Removing and Replacing the Chassis Cover, page 4-38
•
Accessing the Diagnostic Panel, page 4-41
•
Installing and Removing Interface Cards, page 4-41
•
Installing and Removing the Power Supply, page 4-44
•
Installing and Removing Fans, page 4-49
•
Troubleshooting Loose Connections, page 4-51
•
OL-18504-01
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.0
4
C H A P T E R
4-1