Hardware Specifications - Cisco Firepower 1600 Hardware Installation Manual

Overview
Description
Maximum AC input current
Maximum input volt amperes
Maximum output power for each power supply
Maximum inrush current
Maximum hold-up time
Power supply output voltage
Power supply standby voltage
Efficiency rating
Form factor
Input connector

Hardware Specifications

The following table lists the hardware specifications for the FMC 1600, 2600, and 4600.
Table 3: FMC 1600, 2600, and 4600 Hardware Specifications
Specification
Dimensions (H x W x D)
Maximum weight (fully
loaded chassis)
Temperature
Relative humidity
Altitude
1600
1.7 x 16.89 x 29.8 in. (4.32 x 43.0 x 75.6 cm)
32.2 lb (16.6 kg)
Operating: 50 to 95°F (10 to 35°C)
Maximum temperature is derated by 1°F/547 ft (1°C/300 m) of altitude above
3117 ft (950 m).
Nonoperating: –40 to 149°F (–40 to 65°C)
When the appliance is stored or transported.
Operating: 8 to 90% noncondensing
Nonoperating: 5 to 95% noncondensing
Operating: 0 to 10,000 ft
Nonoperating: 0 to 40,000 ft when the appliance is stored or transported
Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide
Specification
9.5 A peak at 100-V AC
4.5 A peak at 208 V AC
950 VA at 100 V AC
770 W
15 A (subcycle duration)
12 ms at 770 W
12 V DC
12 V DC
Climate Savers Platinum Efficiency (80 Plus Platinum
certified)
RSP2
IEC320 C13/C15
2600 4600
34.1 lb (16.8 kg) 36.0 lb (17.0 kg)
Hardware Specifications
13