Supported Sensors - Cisco IPS-4255-K9 - Intrusion Protection Sys 4255 Installation Manual

Chapter 1 Introducing the Sensor
For More Information
For the procedures for configuring VLAN groups for the IDSM2, refer to

Supported Sensors

Caution Installing the most recent software on unsupported sensors may yield unpredictable results. We do not
support software installed on unsupported platforms.
Table 1-4
Table 1-4
Model Name
Appliances
IPS 4240
IPS 4255
IPS 4260
IPS 4270-20
Modules
AIM IPS
AIP SSM-10
AIP SSM-20
AIP SSM-40
IDSM2
NME IPS
1. The IPS 4240-DC-K9 is a NEBS-compliant product.
The following NRS and IDS appliance models are legacy models and are not supported in this document:
•
•
•
•
•
OL-18504-01
lists the sensors (IPS appliances and modules) that are supported by Cisco IPS 7.0.
Supported Sensors
Part Number
IPS 4240-K9
IPS 4240-DC-K9
IPS 4255-K9
IPS 4260-K9
IPS 4260-4GE-BP-K9
IPS 4260-2SX-K9
IPS-4270-K9
IPS-4270-4GE-BP-K9
IPS-4270-2SX-K9
AIM IPS-K9
ASA-SSM-AIP-10-K9
ASA-SSM-AIP-20-K9
ASA-SSM-AIP-40-K9
WS-SVC-IDSM2-K9
NM-IPS-K9
NRS-2E
NRS-2E-DM
NRS-2FE
NRS-2FE-DM
NRS-TR
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.0
Optional Interfaces
—
1
—
—
IPS-4GE-BP-INT=
IPS-2SX-INT=
—
—
IPS-4GE-BP-INT=
IPS-2SX-INT=
—
—
—
—
—
—
—
—
Supported Sensors
Configuring the IDSM2.
1-17