Installing System Images
Clear the IDSM2 maintenance partition host configuration (ip address, gateway, hostname).
Step 7
guest@idsm2.localdomain# clear ip
guest@localhost.localdomain# show ip
IP address
Subnet Mask
IP Broadcast
DNS Name
Default Gateway : 0.0.0.0
Nameserver(s)
guest@localhost.localdomain#
Step 8
Configure the maintenance partition host configuration.
a.
Specify the IP address.
guest@localhost.localdomain# ip address ip_address netmask
b.
Specify the default gateway.
guest@localhost.localdomain# ip gateway gateway_ip_address
Specify the hostname.
c.
guest@localhost.localdomain# ip host hostname
View the maintenance partition host configuration.
Step 9
guest@idsm2.localdomain# show ip
IP address
Subnet Mask
IP Broadcast
DNS Name
Default Gateway : 10.89.149.126
Nameserver(s)
guest@idsm2.localdomain#
Step 10
Verify the image installed on the application partition.
guest@idsm2.localdomain# show images
Device name
-----------
Hard disk(hdd)
guest@idsm2.localdomain#
Verify the maintenance partition version (including the BIOS version).
Step 11
guest@idsm2.localdomain# show version
Maintenance image version: 2.1(2)
mp.2-1-2.bin : Thu Nov 18 11:41:36 PST 2004 :
integ@kplus-build-lx.cisco.com
Line Card Number :WS-SVC-IDSM2-XL
Number of Pentium-class Processors : 2
BIOS Vendor: Phoenix Technologies Ltd.
BIOS Version: 4.0-Rel 6.0.9
Total available memory: 2012 MB
Size of compact flash: 61 MB
Size of hard disk: 19077 MB
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.0
12-32
: 0.0.0.0
: 0.0.0.0
: 0.0.0.0
: localhost.localdomain
:
: 10.89.149.74
: 255.255.255.128
: 10.255.255.255
: idsm2.localdomain
:
Partition#
----------
1
Chapter 12
Upgrading, Downgrading, and Installing System Images
Image name
----------
6.1(1)
OL-18504-01