Upgrading The Idsm2 Maintenance Partition For Cisco Ios Software - Cisco IPS-4255-K9 - Intrusion Protection Sys 4255 Installation Manual

Chapter 12 Upgrading, Downgrading, and Installing System Images
Upgrade the maintenance partition. You are asked whether you want continue.
Step 5
idsm2(config)# upgrade
ftp://user@ftp_server_IP_address/directory_path
Enter the FTP server password.
Step 6
Enter
Step 7
For More Information
•
•

Upgrading the IDSM2 Maintenance Partition for Cisco IOS Software

To upgrade the maintenance partition, follow these steps:
Download the IDSM2 maintenance partition file (c6svc-mp.2-1-2.bin.gz) to the FTP root directory of an
Step 1
FTP server that is accessible from your IDSM2.
Log in to the switch CLI.
Step 2
Session in to the application partition CLI.
Step 3
router# session slot slot_number processor 1
Log in to the IDSM2.
Step 4
Enter configuration mode.
Step 5
idsm2# configure terminal
Upgrade the maintenance partition.
Step 6
idsm2(config)# upgrade
ftp://user@ftp_server_IP_address/directory_path/c6svc-mp.2-1-2.bin.gz
Specify the FTP server password.
Step 7
Password: ********
You are prompted to continue.
Continue with upgrade?:
Enter
Step 8
For More Information
•
•
OL-18504-01
to continue. The maintenance partition file is upgraded.
y
For a list of supported FTP and HTTP/HTTPS servers, see
Servers, page 12-2.
For the procedure for locating software on Cisco.com, see
to continue.
yes
For a list of supported FTP and HTTP/HTTPS servers, see
Servers, page 12-2.
For the procedure for locating software on Cisco.com, see
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.0
Installing System Images
/
c6svc-mp.2-1-2.bin.gz
Supported FTP and HTTP/HTTPS
Obtaining Cisco IPS Software, page
Supported FTP and HTTP/HTTPS
Obtaining Cisco IPS Software, page
11-1.
11-1.
12-39