Hardware Specifications - Cisco Firepower 9300 Hardware Installation Manual

Overview
100G-CUxM, 1m, 2m, 3m, 5m

Hardware Specifications

The following table contains hardware specifications for the Firepower 9300.
Physical Specifications for the 9300 Chassis
Dimensions (H x W x D)
Weight
Physical Specification for the 9300 Security Module
Dimensions
Weight
Memory Per 9300 Security Module
DDR4 DIMM
Power
Input voltage
Maximum output power
Maximum input current
Redundancy
Frequency
Efficiency
Environment
QSFP-100G-CUxM
Note
5.25 x 17.5 x 32 in. (13.3 x 44.5 x 81.3 cm)
105 lb (47.7 kg) with 1 security module
135 lb (61.2 kg) fully configured
1.95 x 8 x 24.2 in. (50 x 203 x 620 mm)
15.5 lb (7.03 kg)
256 GB—SM-24, SM-36, SM-44
AC: 200 to 240 V AC
DC: -40 to -60 V DC
HVDV: 240 to 380 V DC
AC: 2500 W
DC: 2500 W
HVDC: 2500 W
AC: 15.5 A to 12.9 A
DC: 69 A to 42 A
HVDC: <14 A at 200 V
1+1
50 to 60 Hz
92 % (at 50 % load)
Cisco Firepower 9300 Hardware Installation Guide
Hardware Specifications
Supported only on the 2- and 4-port 100G
single-wide network modules
(FPR-NM-2X100G and
FPR-NM-4X100G).
29