Installing the Rail System Kit
To extend the IPS 4270-20 from the rack, follow these steps:
Pull the quick-release levers on each side of the front bezel of the IPS 4270-20 to release it from the rack
Step 1
and extend it on the rack rails until the rail-release latches engage.
Note
Step 2
After performing the installation or maintenance procedure, slide the IPS 4270-20 in to the rack by
pressing the rail-release latches.
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.0
4-26
The release latches lock in to place when the rails are fully extended.
1
2
3
4
5
6
7
8
Cis co IPS
427 0 SER
IES
Int rus ion
Pre ven tio
n Sen sor
Chapter 4
Installing the IPS 4270-20
OL-18504-01