Troubleshooting Loose Connections - Cisco IPS-4255-K9 - Intrusion Protection Sys 4255 Installation Manual

Chapter 4 Installing the IPS 4270-20

Troubleshooting Loose Connections

Perform the following actions to troubleshoot loose connections on a sensor:
•
•
•
•
•
•
•
OL-18504-01
Make sure all power cords are securely connected.
Make sure all cables are properly aligned and securely connected for all external and internal
components.
Remove and check all data and power cables for damage. Make sure no cables have bent pins or
damaged connectors.
Make sure each device is properly seated.
If a device has latches, make sure they are completely closed and locked.
Check any interlock or interconnect indicators that indicate a component is not connected properly.
If problems continue, remove and reinstall each device, checking the connectors and sockets for bent
pins or other damage.
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.0
Troubleshooting Loose Connections
4-51