Cisco IPS-4255-K9 - Intrusion Protection Sys 4255 Installation Manual page 79

Chapter 3 Installing the IPS 4260
Attach the front-tab mounting bracket to the chassis with two 8-32x1/4' SEMS screws. You can flip the
Step 2
bracket to push the system forward in the rack.
Using the four inner studs, install the mounting brackets to the outer rail with four 8-32 KEPS nuts. Insert
Step 3
four thread covers over the four outer studs on each side.
OL-18504-01
RES ET
C is co
ID
IP S 42
ID
NIC 60 se ri
POW ER
FLA SH es
Int rus ion
STA TUS
Pre ve nti
on Se ns
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.0
or
Rack Mounting
3-11