Cisco FMC 1600 Hardware Installation Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Firewall
  5. FMC 1600
  6. Hardware installation manual

Cisco FMC 1600 Hardware Installation Manual

Firepower management center
Hide thumbs
Table of Contents

Advertisement

Quick Links

Cisco Firepower Management Center 1600, 2600, and 4600 Hardware
Installation Guide
First Published: 2019-06-26
Last Modified: 2021-05-03
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883

Advertisement

Table of Contents
loading

Related Manuals for Cisco FMC 1600

Summary of Contents for Cisco FMC 1600

  • Page 1 Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide First Published: 2019-06-26 Last Modified: 2021-05-03 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883...
  • Page 2 Cisco has more than 200 offices worldwide. Addresses and phone numbers are listed on the Cisco website at www.cisco.com/go/offices. Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: https://www.cisco.com/c/en/us/about/legal/trademarks.html.

  • Page 3: Table Of Contents

    Prevent ESD Damage Site Environment Power Supply Considerations Rack Configuration Considerations C H A P T E R 3 Rack-Mount the Chassis Unpack and Inspect the Chassis Rack-Mount the Chassis Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide...
  • Page 4 Contents C H A P T E R 4 Installation, Maintenance, and Upgrade Power Button Shutdown Remove and Replace a Drive Remove and Replace a Power Supply Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide...

  • Page 5: Overview

    IDs (PIDs) associated with the FMC 1600, 2600, and 4600. You can remove and replace drives and power supplies. For all other internal component failures, you must send your chassis for return material authorization (RMA).
  • Page 6 Support for 1000 Mbps, 1 Gbps, and 10 Gbps The primary management port is eth0. You can use eth1, eth2, and eth3 as secondary management or event ports. USB ports Two USB 3.0 Type A Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide...

  • Page 7: Package Contents

    RAID 5, hot-swappable Package Contents The following figure shows the package contents for the FMC 1600, 2600, and 4600. Note that the contents are subject to change and your exact contents might contain additional or fewer items. Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide...

  • Page 8: Serial Number Locations

    FMC. Serial Number Locations The serial number (SN) for the FMC 1600, 2600, and 4600 is printed on the pullout asset card located on the front panel as shown in the following figure of the FMC 1600.
  • Page 9 The serial number is also on the label on the cover of the chassis as shown in the following figure. Caution The cover latch on the top of the chassis cover is not supported. There are no internal field-replaceable parts in the FMC 1600, 2600, and 4600. Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide...

  • Page 10: Front Panel

    Serial number label Cover latch Not supported Front Panel The following figure shows the front panel features and disk-drive configuration for the FMC 1600. See Front Panel LEDs, on page 9 for a description of the LEDs. Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide...
  • Page 11 The following figure shows the front panel features and disk-drive configuration for the FMC 2600. See Front Panel LEDs, on page 9 for a description of the LEDs. Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide...
  • Page 12 The following figure shows the front panel features and disk-drive configuration for the FMC 4600. See Front Panel LEDs, on page 9 for a description of the LEDs. Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide...

  • Page 13: Front Panel Leds

    Pullout asset card KVM port Not supported; use the VGA and USB keyboard ports instead. Front Panel LEDs The following figure shows the front panel LEDs and describes their states. Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide...
  • Page 14 • Amber—The chassis is in standby mode. • Blue, flashing—The unit identification • Green—The chassis is in main power mode. function is activated. Power is supplied to all components. Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide...
  • Page 15 • Green—The chassis is operating at normal temperature. • Amber—One or more temperature sensors breached the critical threshold. • Amber, flashing—One or more temperature sensors breached the unrecoverable threshold. Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide...

  • Page 16: Rear Panel

    Cisco Firepower Management Center Getting Started Guide for Models 1600, 2600, and 4600. The following figure shows the rear panel of the FMC 1600, 2600, and 4600. Figure 8: Rear Panel USB 3.0 Type A (USB 1) USB 3.0 Type A (USB 2)

  • Page 17: Rear Panel Leds

    • Off—No link is present. • Amber—Link speed is 100 Gbps. • Amber—Link is active. • Green—Link speed is 1 Gbps. • Green, flashing—Traffic is present on the active link. Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide...

  • Page 18: Power Supply

    • Amber—Critical error detected; 12-V main power off ( for example, overcurrent, overvoltage, or overtemperature failure). Power Supply The following table lists the specifications for each 770-W AC power supply used in the FMC 1600, 2600, and 4600. Table 2: Power Supply Specifications Description...

  • Page 19: Hardware Specifications

    Operation at 73°F (23°C) Product ID Numbers The following table lists the field-replaceable PIDs associated with the FMC 1600, 2600, and 4600. The spare components are ones that you can order and replace yourself. If any internal components fail, you must get a return material authorization (RMA) for the entire chassis including the SFPs and SFP cables.

  • Page 20: Power Cord Specifications

    Each power supply has a separate power cord. Standard power cords or jumper power cords are available for connection to the FMC 1600, 2600, and 4600. The jumper power cords for use in racks are available as an optional alternative to the standard power cords.
  • Page 21 Plug: NBR 14136 Cord set rating: 10 A, 250 V Connector: IEC 60320/C13 Figure 13: Cabinet Jumper CAB-C13-C14-2M Plug: SS10A Cord set rating: 10A, 250V Connector: HS10S, C-13 to C-14 Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide...
  • Page 22 Plug: SS10A Cord set rating: 10 A, 250 V Connector: HS10S, C-13 to C-14 Figure 16: China CAB-250V-10A-CH Plug: GB2099.1/2008 Cord set rating: 10 A, 250 V Connector: IEC 60320/C13 Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide...
  • Page 23 Plug: IS 6538-1971 Cord set rating: 16 A, 250 V Connector: IEC 60320-C13 Figure 19: Israel CAB-250V-10A-IS Plug: SI-32 Cord set rating: 10 A, 250 V Connector: IEC 60320-C13 Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide...
  • Page 24 Cord set rating: 12 A, 125 V Connector: IEC 60320/C13 Figure 22: Japan CAB-C13-C14-2M-JP Plug: EN 60320-2-2/E Cord set rating: 10 A, 250 V Connector: EN 60320/C13 to C14 Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide...
  • Page 25 Plug: NEMA5-15P Cord set rating: 13 A, 125 V Connector: IEC 60320/C15 Figure 25: North America CAB-N5K6A-NA Plug: NEMA6-15P Cord set rating: 10 A, 125 V Connector: IEC 60320/C13 Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide...
  • Page 26 Plug: SEV 1011 (MP232-R) Cord set rating: 10 A, 250 V Connector: IEC 60320/C15 Figure 28: Taiwan CAB-ACTW Plug: EL 302 (CNS10917) Cord set rating: 10 A, 125 V Connector: IEC 60320/C13 Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide...
  • Page 27 Overview Power Cord Specifications Figure 29: United Kingdom CAB-9K10A-UK Plug: BS1363A/SS145 Cord set rating: 10 A, 250 V Connector: IEC 60320/C15 Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide...
  • Page 28 Overview Power Cord Specifications Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide...

  • Page 29: Installation Preparation

    Use the statement number provided at the end of each warning statement to locate its translation in the translated safety warnings for this device. SAVE THESE INSTRUCTIONS Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide...
  • Page 30 Laser radiation is present when the system is open. Warning Statement 1014 Laser Radiation This is a Class 4 laser product. Invisible laser radiation is present. Avoid eye or skin exposure to direct or scattered radiation. Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide...
  • Page 31 Install only in accordance with national and local wiring regulations. Warning Statement 1051 Laser Radiation Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into beams or view directly with optical instruments. Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide...

  • Page 32: Safety Recommendations

    • Look carefully for possible hazards in your work area, such as moist floors, ungrounded power extension cables, frayed power cords, and missing safety grounds. • If an electrical accident occurs: Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide...

  • Page 33: Prevent Esd Damage

    • Install proper grounding for the site to avoid damage from lightning and power surges. Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide...

  • Page 34: Rack Configuration Considerations

    • Baffles can help to isolate exhaust air from intake air, which also helps to draw cooling air through the chassis. The best placement of the baffles depends on the airflow patterns in the rack. Experiment with different arrangements to position the baffles effectively. Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide...

  • Page 35: Rack-Mount The Chassis

    • Effect of damage on the installation Rack-Mount the Chassis You can install the chassis in a rack using the Cisco rack kit. The rack must be of the following type: Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide...
  • Page 36 • The slide rails for the chassis have an adjustment range of 24 to 36 inch (610 to 914 mm). Note The slide rails supplied by Cisco Systems for the chassis do not require tools for installation if you install them in a rack that has square 0.38-inch (9.6 mm), round 0.28-inch (7.1 mm), or #12-24 UNC threaded holes.
  • Page 37 Slide the release clip toward the rear on both inner rails, and then continue pushing the chassis into the rack until its front slam latches engage with the rack posts Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide...
  • Page 38 What to do next Continue with the Connect Cables, Turn on Power, and Verify Status topics in the Cisco Firepower Management Center Getting Started Guide for Models 1600, 2600, and 4600. Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide...
  • Page 39 To avoid data loss or damage to your operating system, perform a graceful shutdown of the operating system. • Graceful shutdown—Press and release the Power button. The operating system performs a graceful shutdown and the FMC goes into standby mode. The power LED is amber. Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide...
  • Page 40 Warning Statement 1030 Equipment Installation Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide...
  • Page 41 Figure 33: Remove the Drive Ejector handle Release button Step 2 Remove the four drive-tray screws that secure the drive to the tray and then lift the drive out of the tray. Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide...
  • Page 42 This FMC also supports cold redundancy. Depending on the power being drawn by the FMC, one power supply might actively provide all power to the system while the remaining power supply is put into a standby Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide...
  • Page 43 Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Warning Statement 1073 No User-Serviceable Parts There are no serviceable parts inside. To avoid risk of electric shock, do not open. Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide...
  • Page 44 Push the power supply into the bay until the release lever locks. c) Connect the power cord to the new power supply. d) If you shut down the FMC, press the Power button to return it to main power mode. Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide...

This manual is also suitable for:

Fmc 2600Fmc 4600

Table of Contents