Manually Upgrading The Zenworks 7 Linux Management With Ir1 Or Zenworks 7 Linux Management - Dell Edition Managed Device To Zenworks 7.2 Linux Management With Ir1/Ir1A; Upgrading The Zenworks 7.2 Linux Management Managed Device To Zenworks 7.2 Linux Management With Ir1 By Using The Hot Patch 5 Channel - Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - INSTALLATION GUIDE 07-20-2009 Installation Manual

4 (Optional) If SLES 10 or SLED 10 are running on DELL server and the managed devices have
the default zmd agent installed, do the following if you want to collect the Dell inventory of the
devices:
4a In the Packages panel, select novell-zenworks-zmd-oem.
4b Click Action > Unset Freshen.
12.3.2 Manually Upgrading the ZENworks 7 Linux Management
with IR1 or ZENworks 7 Linux Management - Dell Edition
Managed Device to ZENworks 7.2 Linux Management with IR1/
IR1a
1 Make sure the managed device meets the requirements. See
Requirements," on page
2 At the Linux managed device, mount the Novell ZENworks 7.2 Linux Management Agent with
Interim Release 1 CD by using the
For example,
If you are using an ISO image rather than a physical CD, copy the ISO to a temporary folder on
the Linux managed device, then mount the image using the following command:
mount -o loop /tempfolderpath/isoimagename.iso mountpoint
Replace tempfolderpath with the path to the temporary folder and replace mountpoint with the
path to the file system location you want to mount the image. The path specified by mountpoint
must already exist.
For example:
mount -o loop /zlm72/ZEN72_LinuxMgmt.iso /zlm72/install
NOTE: The ISO image of ZENworks 7.2 Linux Management with IR1a is available at the
Novell Downloads Web site (http://download.novell.com/
Download?buildid=Kh157xp2yWA~).
3 Log in as
command:
./zlm-upgrade
4 When prompted to upgrade ZENworks Linux Management, enter
5 Review the Software License Agreement, pressing Page Down to scroll down the page, then
enter
The install program stops ZENworks services, subscribes to the upgrade channels, upgrades
RPMs, upgrades zmd, runs upgrade scripts, and then restarts the ZENworks services.
12.3.3 Upgrading the ZENworks 7.2 Linux Management
Managed Device to ZENworks 7.2 Linux Management with IR1
by Using the Hot Patch 5 Channel
1 Install ZENworks 7.2 Linux Management Hot Patch 5. For more information on how to obtain
and install the Hot Patch, contact
102 Novell ZENworks 7.2 Linux Management Installation Guide
26.
mount /dev/cdrom /zlm7
, then start the upgrade program from the mount point by running the following
root
to accept the agreement.
Y
mount device mountpoint
.
Novell Support (http://www.novell.com/support).
Section 2.3, "Managed Device
command.
to continue.
Y