Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - INSTALLATION GUIDE 07-20-2009 Installation Manual page 125

6 Copy both the ZENworks Linux Management packages and the ZENworks Linux Management
- client RPMs hot patch to the new
the corresponding directories.
For example, you must copy i586 RPMs to the i586 directory.
7 After copying both the ZENworks Linux Management packages and the hot patch ZENworks
Linux Management - client RPMs, you must delete the earlier versions of the same RPM.
8 At the server console prompt, go to
the create_package_descr-x /setup/descr command.
9 At the server console prompt, go to the
prompt, then enter
descr
IMPORTANT: Make sure to include a period at the end of the command.
10 At the server console prompt, go to
prompt, then enter the
setup/descr
11 At the
/install_source_path/ prompt
file with the following content:
add_on_products
nfs://install_source_path/zlm-update
12 Edit the packages section in the control file to include the ZENworks Linux Management client
package details.
For example:
<package>liby2util</package>
<package>libzypp</package>
<package>libzypp-zmd-backend</package>
<package>novell-zenworks-install</package>
<package>novell-zenworks-utilities</package>
<package>novell-zenworks-zmd-actions</package>
<package>novell-zenworks-zmd-gconfpolicyenforcers</package>
<package>novell-zenworks-zmd-oem</package>
<package>novell-zenworks-zmd-policyenforcers</package>
<package>novell-zenworks-zmd-policymanagers</package>
<package>novell-zenworks-zmd-settings</package>
<package>novell-zenworks-zmd-tess</package>
<package>rug</package>
<package>yast2</package>
<package>yast2-core</package>
<package>yast2-country</package>
<package>yast2-ncurses</package>
<package>yast2-packager</package>
<package>yast2-perl-bindings</package>
<package>yast2-pkg-bindings</package>
<package>yast2-qt</package>
<package>yast2-slp</package>
<package>zen-updater</package>
<package>zmd</package>
<package>zmd-inventory</package>
<package>zypper</package>
<package>novell-zenworks-zlm-release</package>
<package>suseRegister</package>
<package>yast2-inetd</package>
<package>yast2-online-update</package>
<package>yast2-registration</package>
source. Each architecture must be copied to
zlm-update
/install_source_path/zlm-update
/install_source_path/zlm-update/suse/setup/
the create_directory_yast.
the /install_source_path/zlm-update/suse/
create_md5sums
, enter the
/
suse
command.
command.
command to create an
touch
, then enter
Hot Patches 125