Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - INSTALLATION GUIDE 07-20-2009 Installation Manual page 124

<add-on>
<add_on_products config:type="list">
<listentry>
<media_url>NFS path of the Operating System/zlm-updates</media_url>
<product>ZLM Hot Patch</product>
<!--
<product_dir>/</product_dir>
</listentry>
</add_on_products>
IMPORTANT: During the installation process of the SUSE operating system, be sure to select
the Clone this system for autoyast check box to automatically generate the template control file
(/
root/autoinst.xml
you must re-install the operating system and select this check box.
2 Configure the NFS server. For more information, see the
www.novell.com/documentation/suse.html).
3 Download the
(http://en.opensuse.org/Inst-source-utils)
created under the
create_directory.yast
create_md5sums
create_package_descr
createpatch
create_repo_for_patch.sh
create_update_source.sh
4 In the
UPDATES=
NAME=
the ZENworks Linux Management client file.
5 At the server console prompt, enter
where
server.
For example, for the SLES10 SP1 operating system, you must enter the following command:
create_update_source/SLES10-SP1-x86_64
This creates a folder structure similar to the one shown below.
zlm-updates
|_______-media.1
|_______content
|_______directory.yast
|_______-setup
|_______-suse
124 Novell ZENworks 7.2 Linux Management Installation Guide
<product>SUSE Linux Enterprise Server 10 SP1</product>-->
). If you completed the installation without selecting this check box,
inst-source-utils-2007.5.15-0.3.noarch.rpm
directory:
/usr/bin
create_update_source.sh
"$SOURCE/zlm-updates"
where
"zlm-updates"
install_source_path
|__-descr
|____-i386
|____-i486
|____-i586
|____-i686
|____-noarch
|____-x86_64
and install it. By default, the following files are
file, set the values as follows:
is the base update source folder required for
"zlm-update"
'create_update_source/install_source_path/'
is the installation path for the operating system on the NFS
.
SUSE documentation (http://
file from inst-source-utils