Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - INSTALLATION GUIDE 07-20-2009 Installation Manual page 109

mount device mountpoint
If you are using an ISO image rather than a physical CD, copy the ISO to a temporary folder on
the Linux server, then mount the image using the following command.
mount -o loop /tempfolderpath/isoimagename.iso mountpoint
Replace
tempfolderpath
the path to the file system location where you want to mount the image. The path specified by
must already exist.
mountpoint
For example:
mount -o loop /zlm72/ZEN72_LinuxMgmt.iso /zlm72/install
3 Log in as , then start the upgrade program form the mount point by running the following
root
command:
./zlm-upgrade
4 When prompted to upgrade ZENworks Linux Management, enter
5 Review the Software License Agreement, pressing Page Down to scroll down the page, then
enter to accept the agreement.
Y
The install program stops ZENworks services, subscribes to the upgrade channels, upgrades
RPMs, upgrades zmd, runs upgrade scripts, and then restarts the ZENworks services.
6 Enter when you are asked if you are upgrading a ZENworks Primary Server.
N
7 Enter when you are asked if you have upgraded the ZENworks Primary Server.
Y
Ignore any "failed to stop" errors that you receive. For example, you receive an error indicating
that eDirectory could not be stopped, but it was already stopped when you executed
novell/zenworks/bin/zlm-config --stop
The upgrade program stops ZENworks services, subscribes to the upgrade channels, upgrades
RPMs, upgrades zmd, and runs upgrade scripts.
After the upgrade is complete, the ZENworks services are restarted. this might take a few
minutes.
8 Delete
ostargets.xml
at the server console prompt.
ostargets.xml
9 Manually copy
ostargets.xml
ZENworks Primary Server to
server.
10 Change the ownership of
zenworks /var/opt/novell/zenworks/lib/www/ostargets.xml
prompt.
11 (Conditional) Repeat Step 1 through Step 10 for each ZENworks Secondary Server that you
want to upgrade.
13.1.2 Upgrading the Managed Devices from ZENworks 7 Linux
Management with IR1 or ZENworks 7 Linux Management - Dell
Edition to ZENworks 7.2 Linux Management with IR2
Upgrading managed devices to ZENworks 7.2 Linux Management with IR2 installs the new
ZENworks Agent.
with the path to the temporary folder and replace
in
by executing
rm /var/opt/novell/zenworks/lib/www/
from
/var/opt/novell/zenworks/lib/www/
/var/opt/novell/zenworks/lib/www/
to
ostargets.xml zenworks
Upgrading to ZENworks 7.2 Linux Management with IR2 109
to continue.
Y
Step 6 on page 108.
on the Secondary
by executing
chown zenworks:
at the server console
with
mountpoint
/opt/
on the