C.4 May 19, 2008 (Interim Release 2)
Updates were made to the following sections. The changes are explained below.
Section C.4.1, "System Requirements," on page 129
Section C.4.2, "Installation," on page 129
Section C.4.3, "Security," on page 129
Section C.4.4, "Upgrade," on page 130
C.4.1 System Requirements
The following changes were made in this section:
Location
Section 2.1, "ZENworks Server Requirements," on
page 25
Section 2.3, "Managed Device Requirements," on
page 26
C.4.2 Installation
The following changes were made in this section:
Location
Section 5.2, "Installing the ZENworks Server
Software," on page 41
Section 6.2, "Installing the ZENworks Server
Software as Secondary Server," on page 48
Section 7.2, "Installing the ZENworks Agent and
Registering the Device," on page 54
C.4.3 Security
The following changes were made in this section:
Location
Section 9.5, "Device Ports," on page 68
Change
Added SLES 10 SP2 to list of operating systems
supported for ZENworks 7.2 Linux Management
with IR1.
Added SLES 10 SP2, SLED 10 SP2, RHEL 5.1 on
the 32-bit (x86) and 64-bit (x86_64) architectures to
the list of operating systems supported for
ZENworks 7.2 Linux Management with IR2.
Change
Updated information for ZENworks 7.2 Linux
Management with IR2.
Updated information for ZENworks 7.2 Linux
Management with IR2.
Updated information for ZENworks 7.2 Linux
Management with IR2.
Change
Added
Section 9.5.1, "Agent Listening Ports," on
page 68
and
Section 9.5.2, "Server Listening
Ports," on page
69.
Documentation Updates 129
Need help?
Do you have a question about the ZENWORKS LINUX MANAGEMENT 7.2 IR2 - INSTALLATION GUIDE 07-20-2009 and is the answer not in the manual?
Questions and answers