Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - INSTALLATION GUIDE 07-20-2009 Installation Manual page 126

13 Append the following information to the init-script section in the control file:
<init-scripts config:type="list">
<script>
<filename>init.sh</filename>
<interpreter>shell</interpreter>
<source><![CDATA[
#!/bin/sh
echo 'Registering to ZLM'
rug shutdown -f
rm /var/lib/zmd/services
/etc/init.d/novell-zmd start
rug set require-verified-certs false
rug sa ZLM Server IP
echo 'Fnished Registration'
]]></source>
</script>
</init-scripts>
</profile>
14 Prepare an info file for starting the AutoYaST installation. An example of the info file is shown
below:
install: nfs://NFSServerIP:/install_source_path
netdevice: eth0
server: NFSServerIP
serverdir: install_source_path
ip: IP address of the device
netmask: NetMask of the device
gateway: Gateway of the device
nameserver: Servername of the device
autoyast: floppy
15 Copy both the control file and the info file to a floppy disk. On booting your device, specify the
install option as
126 Novell ZENworks 7.2 Linux Management Installation Guide
linux autoyast=floppy.
#zlm server