Upgrading The Managed Device To Zenworks 7.2 Linux Management With Ir1/Ir1A; Upgrading Managed Devices By Using Upgrade Bundles - Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - INSTALLATION GUIDE 07-20-2009 Installation Manual

2 Install ZENworks 7.2 Linux Management Hot Patch 5. For more information on how to obtain
and install the Hot Patch, contact
3 Apply the TID 3859039. For more information about applying the TID, see
(http://www.novell.com/support).
12.3 Upgrading the Managed Device to
ZENworks 7.2 Linux Management with IR1/IR1a
Upgrading managed devices to ZENworks 7.2 Linux Management with IR1/IR1a installs the new
ZENworks Agent.
To upgrade the managed device from the ZENworks 7 Linux Management with IR1 or ZENworks 7
Linux Management - Dell Edition to ZENworks 7.2 Linux Management with IR1/IR1a, use one of
the following ways:
"Upgrading Managed Devices by Using Upgrade Bundles" on page 98
"Manually Upgrading the ZENworks 7 Linux Management with IR1 or ZENworks 7 Linux
Management - Dell Edition Managed Device to ZENworks 7.2 Linux Management with IR1/
IR1a" on page 102
To upgrade the managed device from ZENworks 7.2 Linux Management to ZENworks 7.2 Linux
Management with IR1/IR1a, use one of the following ways:
"Upgrading Managed Devices by Using Upgrade Bundles" on page 98
"Upgrading the ZENworks 7.2 Linux Management Managed Device to ZENworks 7.2 Linux
Management with IR1 by Using the Hot Patch 5 Channel" on page 102

12.3.1 Upgrading Managed Devices by Using Upgrade Bundles

You can upgrade the managed devices from ZENworks 7 Linux Management with IR1, ZENworks
7 Linux Management - Dell Edition, or ZENworks 7.2 Linux Management to ZENworks 7.2 Linux
Management with IR1/IR1a by using upgrade bundles.
Make sure the managed device meets the requirements. See
Requirements," on page
Complete the following tasks in the order listed:
1. "Creating a Script for Upgrade Bundles" on page 98
2. "Creating Catalogs for Upgrade Bundles" on page 99
3. "Upgrading Managed Devices Other Than SLES 10 and SLED 10 by Using an Upgrade
Bundle" on page 100
Upgrade Bundle" on page
Creating a Script for Upgrade Bundles
1 In the ZENworks Control Center, click the Bundles tab.
2 Click the folder that you created while performing an in-place upgrade on the ZENworks
Primary Server
3 Click the underlined name of the desired upgrade bundle to display its details.
98 Novell ZENworks 7.2 Linux Management Installation Guide
Novell Support
26.
or "Upgrading SLES 10 or SLED 10 Managed Devices by Using an
101.
(Step 11 on page 96) to hold the upgrade bundles.
(http://www.novell.com/support).
Section 2.3, "Managed Device
Novell Support