Upgrading From Zenworks 7 Linux Management With Ir1 Or Zenworks 7 Linux Management - Dell Edition To Zenworks 7.2 Linux Management With Ir2; Zenworks 7 Linux Management - Dell Edition To Zenworks 7.2 Linux Management With - Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - INSTALLATION GUIDE 07-20-2009 Installation Manual

On a SLES 10 IA 64 platform, before upgrading to ZENworks 7.2 Linux Management with IR2
from the earlier versions of ZENworks Linux Management, you must change the security level
preference from Signature to None.
1 Back up the /bin/rpm file by using the cp /bin/rpm /bin/rpm.bak command.
2 Change the security level preference to None by using the rug set security-level none
command. For more information, see
Management Administration
3 Run the install script by using the sh ia64_72IR2_Install.sh command.
4 Install ZENworks 7.2 Linux Management with IR2.
5 Restore the rpm.bak file by using the mv /bin/rpm.bak /bin/rpm command.
The following sections provide more information:
Section 13.1, "Upgrading from ZENworks 7 Linux Management with IR1 or ZENworks 7
Linux Management - Dell Edition to ZENworks 7.2 Linux Management with IR2," on
page 106
Section 13.2, "Upgrading from ZENworks Linux Management 7.2 to ZENworks Linux
Management 7.2 with IR2," on page 110
Section 13.3, "Upgrading from ZENworks 7.2 Linux Management with IR1 to ZENworks 7.2
Linux Management with IR2," on page 111
Section 13.4, "Increasing the Security Level After Upgrading a ZENworks Server from
ZENworks 7 Linux Management with IR2," on page 112
Section 13.5, "Changes to Bundle Schedules in ZENworks 7.2 Linux Management with IR2,"
on page 113
Section 13.6, "Upgrade Options," on page 113
13.1 Upgrading from ZENworks 7 Linux
Management with IR1 or ZENworks 7 Linux
Management - Dell Edition to ZENworks 7.2 Linux
Management with IR2
The following sections provide information on upgrading from ZENworks 7 Linux Management
with IR1 or ZENworks 7 Linux Management - Dell Edition to ZENworks 7.2 Linux Management
with IR2:
Section 13.1.1, "Upgrading the Servers from ZENworks 7 Linux Management with IR1 or

ZENworks 7 Linux Management - Dell Edition to ZENworks 7.2 Linux Management with

IR2," on page 107
Section 13.1.2, "Upgrading the Managed Devices from ZENworks 7 Linux Management with
IR1 or ZENworks 7 Linux Management - Dell Edition to ZENworks 7.2 Linux Management
with IR2," on page 109
106 Novell ZENworks 7.2 Linux Management Installation Guide
"rug (1)" in the Novell ZENworks 7.27.3 Linux
Guide.