Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - INSTALLATION GUIDE 07-20-2009 Installation Manual page 108

Performing an In-Place Upgrade on the ZENworks Primary Server
1 Make sure that the server is running, and meets the requirements. See
Server Requirements," on page
2 At the Linux server, mount the Novell ZENworks 7.2 Linux Management with Interim Release
2 CD by using the
For example,
If you are using an ISO image rather than a physical CD, copy the ISO to a temporary folder on
the Linux server, then mount the image using the following command:
mount -o loop /tempfolderpath/isomimagename.iso mountpoint
Replace
the path to the file system location where you want to mount the image. The path specified by
mountpoint
For example:
mount -o loop /zlm72/ZEN72_LinuxMgmt.iso /zlm72/install
3 Log in as
command:
./zlm-upgrade
4 When prompted to upgrade ZENworks Linux Management, enter
5 Review the Software License Agreement, pressing Page Down to scroll down the page, then
enter
6 Enter
Make sure all ZENworks services on secondary servers are stopped. You can execute
novell/zenworks/bin/zlm-config --stop
servers.
7 Press Enter to continue.
The upgrade program stops ZENworks services, subscribes to the upgrade channels, upgrades
RPMs, upgrades zmd, runs upgrade scripts, and then upgrades the database schema.
8 (Conditional) If you have ZENworks Secondary Servers to upgrade, continue with
an In-Place Upgrade on a ZENworks Secondary Server" on page
9 Continue with
Management with IR1 or ZENworks 7 Linux Management - Dell Edition to ZENworks 7.2
Linux Management with IR2," on page
Performing an In-Place Upgrade on a ZENworks Secondary Server
You must upgrade the ZENworks Primary Server before upgrading ZENworks Secondary Servers.
For step-by-step information, see
Server" on page
1 Make sure that the server is running, and meets the requirements. See
Server Requirements," on page
2 At the Linux server, mount the Novell ZENworks 7.2 Linux Management with Interim Release
2 CD by using the
For example,
108 Novell ZENworks 7.2 Linux Management Installation Guide
mount device mountpoint
mount /dev/cdrom /zlm72
with the path to the temporary folder and replace
tempfolderpath
must already exist.
, then start the upgrade program from the mount point by running the following
root
to accept the agreement.
Y
when you are asked if you are upgrading a ZENworks Primary Server.
Y
Section 13.1.2, "Upgrading the Managed Devices from ZENworks 7 Linux
"Performing an In-Place Upgrade on the ZENworks Primary
108.
mount device mountpoint
mount /dev/cdrom /zlm72.
25.
command.
.
to shut down the services on secondary
109.
25.
command.
Section 2.1, "ZENworks
with
mountpoint
to continue.
Y
/opt/
"Performing
108.
Section 2.1, "ZENworks