Linux Management With Ir2; Upgrading The Managed Device From Zenworks 7.2 Linux Management With Ir1 To Zenworks 7.2 Linux Management With Ir2; Management With Ir2 - Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - INSTALLATION GUIDE 07-20-2009 Installation Manual

13.3.1 Upgrading the Servers from ZENworks 7.2 Linux
Management with IR1 to ZENworks 7.2 Linux Management with
IR2
1 Before performing the upgrade, do the following:
Take a reliable backup of your object and data stores, and eDirectory. For more
information, see
ZENworks 7.27.3 Linux Management Administration
Ensure that eDirectory is listening on port 10389.
Take an image of the ZENworks servers.
Ensure that the ZENworks Linux Management server and the server on which the Oracle
or the PostgreSQL database is running are in time sync.
Remove OpenLDAP 2 from the ZENworks server, if it is installed.
2 Install ZENworks 7.2 Linux Management with IR1 Hot Patch 5. For more information on how
to obtain and install the Hot Patch, contact
13.3.2 Upgrading the Managed Device from ZENworks 7.2
Linux Management with IR1 to ZENworks 7.2 Linux

Management with IR2

Upgrading managed devices to ZENworks 7.2 Linux Management with IR2 installs the new
ZENworks Agent.
"Upgrading the ZENworks 7.2 IR1 Linux Management Managed Device to ZENworks 7.2
Linux Management with IR2 by Using the Hot Patch 5 Channel" on page 112
Upgrading the ZENworks 7.2 IR1 Linux Management Managed Device to ZENworks
7.2 Linux Management with IR2 by Using the Hot Patch 5 Channel
1 Install ZENworks 7.2 Linux Management IR1 Hot Patch 5. For more information on how to
obtain and install the Hot Patch, contact
13.4 Increasing the Security Level After
Upgrading a ZENworks Server from ZENworks 7

Linux Management with IR2

If you upgrade a ZENworks Server from ZENworks 7 Linux Management with IR1 to ZENworks
7.2 Linux Management with IR1, the default PostgreSQL database security level requires
authentication, but you can optionally increase the security level of the database. In most corporate
settings, the PostgreSQL database resides on a corporate LAN with firewall protection. If you want
to increase the security level of the database, edit the
the IP address and subnet mask for the ZENworks Primary Server and for all ZENworks Secondary
112 Novell ZENworks 7.2 Linux Management Installation Guide
"ZENworks Object Store and Data Store
1. To verify whether OpenLDAP 2 has been installed, execute
at the server console prompt. This displays the installed package version.
openldap2
2. To remove OpenLDAP 2, execute
Maintenance" in the
Guide.
.
rpm -e openldap2
Novell Support (http://www.novell.com/support).
Novell Support (http://www.novell.com/support).
/var/lib/pgsql/pg_hba.conf
Novell
rpm -qa /grep
file to add