Management With Ir1; Changes To Bundle Schedules In Zenworks 7.2 Linux Management With Ir1; Upgrade Options - Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - INSTALLATION GUIDE 07-20-2009 Installation Manual

12.4 Increasing the Security Level After
Upgrading a ZENworks Server from ZENworks 7
Linux Management with IR1
If you upgrade a ZENworks Server from ZENworks 7 Linux Management with IR1 to ZENworks
7.2 Linux Management with IR1, the default PostgreSQL database security level requires
authentication, but you can optionally increase the security level of the database. In most corporate
settings, the PostgreSQL database resides on a corporate LAN with firewall protection. If you want
to increase the security level of the database, edit the
the IP address and subnet mask for the ZENworks Primary Server and for all ZENworks Secondary
Servers as well as for the local host. An unedited file has a series of zeroes in place of the IP
addresses and subnet masks; you replace the zeroes with the information for your primary and
secondary ZENworks servers.
If you upgrade from ZENworks 7 Linux Management - Dell* Edition, this process is not necessary.
Consult your PostgreSQL documentation for more information.
12.5 Changes to Bundle Schedules in ZENworks
7.2 Linux Management with IR1
Because of the elimination of certain schedule types for bundles in ZENworks 7.2 Linux
Management with IR1, the deployment and installation schedules for bundles that existed in your
ZENworks system prior to upgrading might behave differently.
ZENworks 7.2 Linux Management with IR1 supports the following schedule types for bundles:
"Date Specific"
"Event"
"Relative to Refresh"
The following schedule types are no longer supported for bundles in ZENworks 7.2 Linux
Management with IR1, although they are still supported for certain policies:
"Day of the Week Specific"
"Monthly"
In an upgrade from ZENworks 7 Linux Management with IR1 or ZENworks 7 Linux Management -
Dell Edition, any bundles that were configured using the Day of the Week or Monthly schedules are
treated as Relative to Refresh after the upgrade.
If you look at a bundle's properties in the ZENworks Control Center after the upgrade, an upgraded
bundle that was originally configured using the Day of the Week Specific or Monthly schedule has
the eliminated schedule type listed, but deploys or installs using the Relative to Refresh schedule.
You can manually change the bundle's displayed schedule type to one of the three valid schedule
types at your convenience.

12.6 Upgrade Options

The following options can be used with the
/var/lib/pgsql/pg_hba.conf
command:
zlm-upgrade
Upgrading to ZENworks 7.2 Linux Management with IR1/IR1a 103
file to add