Tempshow - Brocade Communications Systems 1606 Command Reference Manual

tempShow

Displays temperature readings.
Synopsis tempshow
Description Use this command to display the current temperature readings of all temperature sensors in a
switch. For each sensor, this command displays the slot number (if applicable), the sensor state,
and the temperature. The temperature readings are given in both Centigrade and Fahrenheit.
Notes The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command
Availability" for details.
Refer to the hardware reference manual for your switch to determine the normal temperature
range.
Operands none
Examples To display temperature and status sensors:
See Also fanShow, psShow, sensorShow, slotShow
Fabric OS Command Reference
53-1001337-01
switch:user> tempshow
Index Slot State
=====================================================
1 1 Ok
2 2 Ok
3 3 Absent
4 4 Absent
5 5 Ok
6 6 Ok
Centigrade Fahrenheit
41 105
39 102
26 78
27 80
2
tempShow
879