Document Conventions - Brocade Communications Systems 1606 Command Reference Manual

•
•
•
•
Approximately an additional 120 help pages have been modified with miscellaneous updates and
to correct documentation errors.
The following commands and command operands have been removed from this manual and
associated help pages:
•
•
•
•
•
•
•
•
•
•
•
•
NOTE
Automatic page breaks in CLI command output displays are being phased out. Use the "more"
option to display command output with page breaks: command | more. Do not use the "more"
option in conjunction with help pages. Executing help command | more will display a command "no
manual entry for command" message.

Document conventions

This section describes text formatting conventions and important notices formats.
Text formatting
The narrative-text formatting conventions that are used in this document are as follows:
Fabric OS Command Reference
53-1001337-01
switchShow
-
New -portname operand.
-
New -slot option to display blade information.
-
Expanded output displays.
slotShow - Support for new hardware.
traceDump - New -c option to clear trace buffer content (RAS).
trunkShow - New -perf option to display trunk performance.
burninErrClear - Internal debug command changed to root only access.
burninErrShow - Internal debug command changed to root only access.
burninLevel - Internal debug command changed to root only access.
burninStatus - Internal debug command changed to root only access.
diagSsetCycle -- Internal debug command changed to root only access.
systemVerification - Internal debug command changed to root only access.
Removed ag --mapreset. Use the new agAutomapBalance command.
Removed cryptocfg --setEE [slot_number]-routing shared.
Removed cryptocfg --reg/--dereg -groupleader.
Removed cryptocfg --failback -container.
Removed hostname parameter from syslogdIpAdd, syslogdIpRemove, and syslogdIShow.
Removed ftrace parameter from portCfg and portShow. FTRACE is a debug function not
intended for end users.
xxv