2
portCfgAutoDisable
To enable the auto disable feature on a port range.
To enable the auto disable feature on a range of ports, some of which were previously enabled. The
following example enables port 4.
To disable the auto disable feature on a port range.
See Also
portCfgShow, portEnable
:
600
switch:admin> portcfgautodisable --enable 0-8
switch:admin> portcfgautodisable --enable 2-4
Same configuration for port 2
Same configuration for port 3
switch:admin> portcfgautodisable --disable 0-8
Fabric OS Command Reference
53-1001337-01