Brocade Communications Systems 1606 Command Reference Manual page 425

To configure a local IPv4 Ethernet address on a Brocade FC4-16E in a chassis (prefix required):
To configure a local IPv4 Ethernet address on an AP7600 with a hidden BP:
To configure an IPv4 FC address for the IPFC interface associated with a logical switch with fabric
ID 123:
To verify the IPv4 FC address for the logical switch:
To delete the IPv4 address for the IPFC interface associated with a logical switch with Virtual Fabric
ID 67:
To configure an IPv4 FC address for the IPFC interface associated with a switch that is not in Virtual
Fabric mode:
To verify the changes:
Fabric OS Command Reference
53-1001337-01
switch:admin> ipaddrset -slot 1 -eth0
switch:admin>ipaddrset -eth0
switch:admin>ipaddrset -ls 123 --add 11.1.2.4/24
IP address is being changed...Done.
switch:admin> ipaddrshow
CHASSIS
Ethernet IP Address: 10.32.220.10
Ethernet Subnetmask: 255.255.240.0
CP0
Ethernet IP Address: 10.32.220.11
Ethernet Subnetmask: 255.255.240.0
Host Name: cp0
Gateway IP Address: 10.32.208.1
CP1
Ethernet IP Address: 10.32.220.12
Ethernet Subnetmask: 255.255.240.0
Host Name: cp1
Gateway IP Address: 10.32.208.1
IPFC address for logical fabric ID 128: 1.2.3.4/24
Backplane IP address of CP0 : 10.0.0.5
Backplane IP address of CP1 : 10.0.0.6
switch:admin> ipaddrset -ls 67 --delete
IP address is being changed...Done.
switch:admin>ipaddrset -ls 128 --add 10.32.72.70/24
IP address is being changed...Done.
switch:admin>ipaddrshow
SWITCH
Ethernet IP Address: 10.32.72.9
Ethernet Subnetmask: 255.255.240.0
Gateway IP Address: 10.32.64.1
DHCP: Off
IPFC address for virtual fabric ID 128: 10.32.72.70/24
add 10.12.34.123/24
--
add 10.12.34.123/24
--
2
ipAddrSet
395