Brocade Communications Systems 1606 Command Reference Manual page 203

Brocade fabric os command reference v6.3.0 (53-1001337-01, july 2009)
Hide thumbs Also See for 1606:
Table of Contents

Advertisement

E. Storage device configuration
1. Create a zone that includes initiator and target.
2. Create a disk CryptoTarget container to be hosted on the encryption engine.
3. Add an initiator to the CryptoTarget container and commit the transaction.
Fabric OS Command Reference
53-1001337-01
a. Determine the device configuration.
FabricAdmin:switch>nsshow
{
Type Pid
COS PortName
N 010600; 2,3;10:00:00:00:c9:2b:c9:3a;20:00:00:00:c9:2b:c9:3a; na
NodeSymb: [35] "Emulex LP9002 FV3.82A1 DV5-4.81A4 "
Fabric Port Name: 20:06:00:05:1e:41:9a:7e
Permanent Port Name: 10:00:00:00:c9:2b:c9:3a
Port Index: 6
Share Area: No
Device Shared in Other AD: No
Redirect: No
The Local Name Server has 1 entry }
FabricAdmin:switch>nscamshow
nscamshow for remote switches:
Switch entry for 2
state rev
owner
known v611 0xfffc01
Device list: count 13
Type Pid COS
NL
0208d3; 3;20:0c:00:06:2b:0f:72:6d;20:00:00:06:2b:0f:72:6d;
FC4s: FCP
PortSymb: [55] "LSI7404XP-LC BR A.1 03-01081-02D FW:01.03.06 Port 1 "
Fabric Port Name: 20:08:00:05:1e:34:e0:6b
Permanent Port Name: 20:0c:00:06:2b:0f:72:6d
Port Index: 8
Share Area: No
Device Shared in Other AD: No
Redirect: No
b. Create and enable a zone named "itzone" that includes initiator and target.
FabricAdmin:switch> zonecreate itzone, "10:00:00:00:c9:2b:c9:3a; 20:0c:00:06:2b:0f:72:6d"
FabricAdmin:switch> cfgcreate itcfg, itzone
FabricAdmin:switch> cfgenable itcfg
You are about to enable a new zoning configuration.
This action will replace the old zoning configuration with the
current configuration selected.
Do you want to enable 'itcfg' configuration (yes, y, no, n): [no] y
zone config"itcfg" is in effect
Updating flash ...
FabricAdmin:switch>cryptocfg --create -container disk my_disk_tgt1 0:00:00:05:1e:41:9a:7e
20:0c:00:06:2b:0f:72:6d 20:00:00:06:2b:0f:72:6d
Operation Succeeded
FabricAdmin:switch>cryptocfg --add -initiator my_disk_tgt 10:00:00:00:c9:2b:c9:3a
20:00:00:00:c9:2b:c9:3a
Operation Succeeded
PortName
cryptoCfg
NodeName
NodeName
2
TTL(sec)
173

Advertisement

Table of Contents
loading

Table of Contents