Brocade Communications Systems 1606 Command Reference Manual page 849

System Group Configuration Parameters
sysDescr
sysLocation
sysContact
authTraps
Security Level Parameters
The --show option displays the current SNMP GET security and SNMP SET security levels. Use
--set secLevel to modify existing settings:
SNMP GET security level
SNMP SET security level
Examples To display the SNMPv1 configuration:
To set the SNMPv1 configuration of a switch:
Fabric OS Command Reference
53-1001337-01
The system description. The default value is Fibre Channel switch.
The location of the system (switch). The default value is End User Premise.
The string must be at least 4 characters in length; the maximum length is
255 characters.
The contact information for this system (switch). The default value is Field
Support. Refer to the definition of sysDescr, sysLocation and sysContact in
the system group of MIB-II. The string must be at least 4 characters in length;
the maximum length is 255 characters.
When enabled, the authentication trap (authenticationFailure) is transmitted
to a configured trap recipient in the event that the agent receives a protocol
message that is not properly authenticated. In the context of SNMPv1 and
SNMPv2c, this means that a request contains a community string that is not
known to the agent. The default value for this parameter is 0 (disabled).
Specifies security level for all SNMP GET requests.
Specifies security level for SNMP SET requests only.
Values are: 0 No security.
1 Authentication only.
2 Authentication and Privacy.
3 OFF
switch:admin> snmpConfig --show snmpv1
SNMPv1 community and trap recipient configuration:
Community 1: Secret C0de (rw)
Trap recipient: 10.32.147.113
Trap recipient Severity Level: 0
Community 2: OrigEquipMfr (rw)
Trap recipient: 1080::8:800:200C:1234
Trap recipient Severity Level: 0
Community 3: private (rw)
No trap recipient configured yet
Community 4: public (ro)
No trap recipient configured yet
Community 5: common (ro)
No trap recipient configured yet
Community 6: FibreChannel (ro)
No trap recipient configured yet
switch:admin> snmpConfig --set snmpv1
SNMP community and trap recipient configuration:
Community (rw): [Secret C0de]
2
SnmpConfig
819